[Case Study] Wellcamp Airport Hangar at Toowoomba QLD

Design Brief

Wellcamp Airport QLD required a hangar for the operation of an air-freight company and teh new airport facility . 

The hangar need to include a full width opening for large hangar doors at one end to allow numerous aircraft to operate from the hangar. The structure also needed to include offices and an attractive architectural finish at the front.

Building Features

  • check
    36 metres wide, 22 metres long (three 7 metre bays), 6 metres high.
  • check
    Full front sliding doors (5.5 metres high by 36 metres wide).
  • check
    Professional office fitout and façade at the front of the building.
  • check
    Ventilation and insulation throughout the building.
  • check
    Fully painted columns, trusses, doors and floors.
  • check
    Cladding Type: Colorbond Trim-Deck

Unique Project Requirements

A high level of finish was very important in the final outcome. Everything was completed with a clean professional finish.

This included the design and construction of a façade at the front, and a fully painted hangar interior.

Techspan Innovative Solution

We worked closely with a team of professional painters and office fitters. The custom steel building was manufactured and painted in house, before being assembled on site.

The office interior fit-out and facade was then completed by a third party contractor. 

Design Guide

Need help with your shed design?

DOWNLOAD YOUR FREE DESIGN GUIDE